ライブラリ登録: Guest
ホーム アーカイブ 役員 今後の会合 国際伝熱会議の集会

FLOW BOILING OF A HIGHLY VISCOUS POLYMER SOLUTION

DOI: 10.1615/IHTC13.p28.30
11 pages

U. Liesenfelder
Bayer Technology Service GmbH, Leverkusen, Germany

K. Kohlgruber
Bayer Technology Service GmbH, Leverkusen, Germany

M. Wienecke
Wärme - und Kältetechnik, Universität - GH Paderborn, Germany

R. Span
University of Paderborn, Paderborn, Germany

要約

Flow boiling experiments with mixtures of poly dimethyl siloxanes and n-pentane are carried out in a vertical annular channel. The mixtures are fed to the test section with a subcooling of 30 − 65 K. The flow condition at the inlet can be characterized as creeping flow with Re-numbers as small as 0.01. Strong radial temperature gradients prevail throughout the entire evaporation process, indicating a laminar flow character even under boiling conditions.
Analysing the experiments, heat transfer to a homogeneous liquid phase, subcooled boiling, fully developed nucleate boiling, convective heat transfer to a two-phase flow and flash effects due to pressure loss can be distinguished.
Yet heat transfer can be described as a first approximation by a simple model which is based on laminar single phase heat transfer and incorporates an additional convective term reflecting the augmentation of convection through the gas phase.

記事をダウンロード MARCレコードをダウンロード 出版倫理および不正行為 私の図書館員へ推薦 このページをブックマークする
 

ICHMTデジタルライブラリ

Measurement of fluid temperature with an arrangement of three thermocouples