Library Subscription: Guest

ISSN Online: 2377-424X

ISBN Print: 978-1-56700-421-2

International Heat Transfer Conference 15
August, 10-15, 2014, Kyoto, Japan

Heat Exchanger

Table of Contents:

Numerical Simulation of Complicated Chevron Plates Passage Hui-bao Luan, Wen-Quan Tao, Guo-Qing Zhu, Bin Chen, Song Wang pages 3471-3481 DOI: 10.1615/IHTC15.hex.008816
Investigation of the Flow Distribution for Supercritical Carbon Dioxide Fluid in a Plate Heat Exchanger Yi-Chun Tang, Chen-Xi Chu, Yur-Tsai Lin, Rony Sian, Chi-Chuan Wang pages 3483-3495 DOI: 10.1615/IHTC15.hex.008647
A Computer Model for Simulation of Drying and Preheating of Wet Iron ore in a Rotary Kiln Ashish Agrawal, Partha S. Ghoshdastidar pages 3497-3511 DOI: 10.1615/IHTC15.hex.009411
Effect of Sand Fouling on Compact Fin Heat Exchangers Sarah Obadina, Josh Fody, Serguei V. Dessiatoun, Michael M. Ohadi, Amir H. Shooshtari pages 3513-3526 DOI: 10.1615/IHTC15.hex.008503
Thermal Performance and Characteristics of SpiraL-Tube Ground Heat Exchanger for Ground-Source Heat Pump Jalaluddin Haddada, Akio Miyara pages 3527-3540 DOI: 10.1615/IHTC15.hex.009412
Comparison between the Thermal Performance of Single and Two-Layer Microchannels Inserted with Micro Pin Fins Olayinka Omowunmi Adewumi, Tunde Bello-Ochende, Josua Petrus Meyer pages 3541-3552 DOI: 10.1615/IHTC15.hex.009149
Flow and Thermal Performance of Graphite Foam Dimpled Fin Heat Exchangers Wamei Lin, Gongnan Xie, Bengt Sunden, Qiuwang Wang pages 3553-3566 DOI: 10.1615/IHTC15.hex.008536
Entropy Generation Minimization Analysis of Passive and Active Magnetocaloric Regenerators Paulo V. Trevizoli, Diego P. Alcalde, Jader R. Barbosa, Jr. pages 3567-3580 DOI: 10.1615/IHTC15.hex.009007
Heat Transfer and Pressure Drop Performance of Offset Strip Fin with Gap between Adjacent Rows Seongwon Hwang, Ji Hwan Jeong, Jae-jun Jeong pages 3581-3590 DOI: 10.1615/IHTC15.hex.008908
A Numerical Study on Turbulent Single-Phase Flow and Heat Transfer in Pillow Plates Mark Piper, Alexander Zibart, Julian Tran, Eugeny Y. Kenig pages 3591-3602 DOI: 10.1615/IHTC15.hex.008929
Quantitative Estimation of Frost Formation on Plate-fin Tube Heat Exchanger by Neutron Radiography Ryosuke Matsumoto, Tomoya Yoshimura, Hisashi Umekawa, Takeyuki Ami, Daisuke Ito, Yasushi Saito pages 3603-3615 DOI: 10.1615/IHTC15.hex.009144
Enhanced Melting in Geometries Suitable for Thermal Energy Storage Gennady Ziskind, Tomer Rozenfeld, Yoram Kozak pages 3617-3631 DOI: 10.1615/IHTC15.hex.009435
Fin Efficiency and the Optimisation of X-Shaped Louvered Fins Bernd Ameel, Joris Degroote, Henk Huisseune, Jan Vierendeels, Michel De Paepe pages 3633-3642 DOI: 10.1615/IHTC15.hex.009085
The Effect of the Circular Cylinder's Insertion Position on Heat Transfer Enhancement in Transition Flow Hui Xu, Lijuan Wang, Kyoji Inaoka, Guannan Xi pages 3643-3650 DOI: 10.1615/IHTC15.hex.009362
Study of Heat Pipe Effectiveness Filled with Different Refrigerants Grzegorz Gorecki pages 3651-3662 DOI: 10.1615/IHTC15.hex.009194
Numerical Simulation of 3D Flow Effect on Heat Transfer from a Tube Bank of Subsea Cooler Nikolay G. Ivanov, Vladimir V. Ris, Evgueni M. Smirnov, Nikolay A. Tschur pages 3663-3674 DOI: 10.1615/IHTC15.hex.009766
Effect of Fin Specification on Thermal Performance of Fin-Tube Heat Exchanger for Heat Pump under Frosting Condition Jeongkeun Kim, Keumnam Cho pages 3675-3682 DOI: 10.1615/IHTC15.hex.009041
CFD Modelling of Flow over in-Line Tube-Banks Hector Iacovides, Brian E. Launder, Alastair West pages 3683-3697 DOI: 10.1615/IHTC15.hex.009644
Maximal Velocity Ratio Design Method for Shell-and-Tube Heat Exchangers with Continuous Helical Baffles Jian-Feng Yang, Min Zeng, Gui-Dong Chen, Qiuwang Wang pages 3699-3714 DOI: 10.1615/IHTC15.hex.009093
Optimization of Life Time Expectance for Heat Exchangers with Special Requirements Pascal Freko, Ingo Thomas, Reinhold Hoelzl, Axel Lehmacher, Alexander Woitalka pages 3715-3725 DOI: 10.1615/IHTC15.hex.009791
Size Effect of the Flow Path on the Flow and Heat Transfer Characteristics in a Cavity Swept by a Visco-Elastic Fluid Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda pages 3727-3741 DOI: 10.1615/IHTC15.hex.009449