Library Subscription: Guest
Home Archives Thermal Letter Officers Future meetings Assembly for International Heat Transfer Conferences
International Heat Transfer Conference 5

ISSN: 2377-424X (online)
ISSN: 2377-4371 (flashdrive)

EFFECT OF INCLINATION ON FILM BOILING

Harry J. Sauer Jr.
Department of Mechanical and Aerospace Engineering University of Missouri-Rolla, Rolla, MO 65401 USA

Shih-Chang Lin
University of Missouri, Rolla, U.S.A.

DOI: 10.1615/IHTC5.300
pages 110-114

Abstract

The object of this paper is to present and discuss the experimental data obtained for the transfer of heat under film boiling conditions from flat surfaces at various orientations. The test fluid for all cases was nitrogen. The boiling surfaces were electrically heated Inconel plates. Film boiling performance has been obtained for a heated flat surface oriented with respect to its longitudinal axis at 0°, 15°, 30°, and 45° from the horizontal with the heater surface facing downward and at 0°, 30°, and 60° from the horizontal with the heater surface facing upward, as well as with the heater surface at 90° (vertical). The resulting uncertainty in the heat transfer coefficient is estimated at ± 12 percent.

Purchase $25.00 Check subscription Publication Ethics and Malpractice Recommend to my Librarian Bookmark this Page