图书馆订购 Guest
主页 旧刊 Thermal Letter 有关人员 未来大会 IHTC汇编
International Heat Transfer Conference 15

ISSN: 2377-424X (online)
ISSN: 2377-4371 (flashdrive)

International Heat Transfer Conference 15
2014, 10-15 August, Kyoto, Japan

This IHTC Digital Library (IDL) contains the keynote and general papers presented at the 15th International Heat Transfer Conference (IHTC-15), which was held very successfully with nearly 1200 participants in Kyoto, Japan during 10-15 August 2014. The program of IHTC-15 was started with an invited lecture and a traditional Fourier lecture in the first plenary session, and then, in succeeding parallel sessions, 29 invited keynote lectures and 698 contributed papers were presented.

Heat transfer, a major academic discipline originating from seminal studies of thermal non-equilibrium phenomena, has grown to include the science of transport phenomena for ions, electrons, and chemical species. This discipline deals with essential fundamentals such as energy, materials, food and water, and also with a range of technologies that support modern lifestyles. Heat transfer is now a vitally important field, as scientists and engineers face difficult challenges: development of cutting-edge technologies for highly efficient energy systems, massive information/communication equipment, high-value-added manufacturing, and for comfortable living environments, to name just a few. Due to its enormous scope and impact, the field of heat transfer is often called "thermal science".

For more than 60 years, IHTC events, nicknamed "Heat Transfer Olympics," have achieved worthy goals by offering unique opportunities for scientists and engineers to gather together, exchange state-of-the-art knowledge, and develop personal networks. The Organizing Committee has kept IHTC traditions while improving certain aspects, so that IHTC-15 will meet the requirements of the rapidly changing scientific environment in the 21st century. First, the International Scientific Committee employed a rigorous review process for submitted manuscripts to ensure that the archive of contributed papers will be of journal quality. As a result, from the initially received collection of more than 1300 extended abstracts, about 700 full papers were finally accepted. To facilitate lively discussions, all of these papers were presented in oral sessions, unlike the poster sessions of previous IHTCs.

In addition to exploring traditional research areas, IHTC-15 posed an important question in order to better serve society: "What is the role of thermal science in meeting societal challenges?" Clearly, we face major issues such as ensuring sustainable development, maintaining healthy ageing, providing sufficient food for all, and stimulating economic growth, and we need to develop scientific and technological solutions. Therefore, we have invited a prominent scientific leader, Professor Hiroyuki Yoshikawa, to deliver the first invited lecture on "Science of Scientific Advice", which was followed by the two panels on "The Role of Thermal Science in Meeting Societal Challenges" and "The Role of Thermal Science for Nuclear Disaster Resilience". Fruitful panel discussions have been summarized as messages from the panels. This sort of broader discussions will hopefully be continued in the future IHTCs. (The presentation materials in these special sessions are available at the web site of IHTC-15.)

Finally, I would like to acknowledge the Science Council of Japan, the Heat Transfer Society of Japan, the International Centre for Heat and Mass Transfer, and numerous cooperating technical societies and companies, for their generous supports. I would also like to express my sincere thanks to the members of the Assembly of IHTCs, all IHTC-15 Committee members, the secretariat, and student aids, for their enormous contributions in organizing and running the outstanding IHTC-15.

Nobuhide Kasagi
Conference Chair, IHTC-15

August 2014

To Access Full Text Conference Proceedings please click here


Maruyama, Shigenao Chairman
Institute of Fluid Science, Tohoku University Katahira 2-1 -1, Aoba-ku Sendai, 980-8577 Japan

Takata, Yasuyuki Vice Chairman
Department of Mechanical Engineering, Thermofluid Physics Laboratory, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, 819-0395, Japan; International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan

Komiya, Atsuki Secretary
Institute of Fluid Science, Tohoku University, 2-1-1, Katahira, Aoba-ku, Sendai 980-8577, Japan

Hanamura, Katsunori
Tokyo Institute of Technology, 2-12-1, Ookayama, Meguro-ku, Tokyo 152-8550, Japan

Nagasaka, Yuji
Keio University, Faculty of Science and Technology, Department of System Design Engineering

Kohno, Masamichi
Department of Mechanical Engineering, Thermofluid Physics Laboratory, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, 819-0395, Japan; International Institute for Carbon-Neutral Energy Research (WPI - I2CNER), Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan

Momoki, Satoru
Department of Mechanical Systems Engineering, Nagasaki University, Nagasaki, Japan

Armfield, Steven W.
School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia

Reizes, John
School of Mechanical and Manufacturing Engineering, UNSW-Sydney, Sydney 2052, Australia

Milanez, Luiz Fernando
Facul. of Mechanical Engineering, Unicamp, Campinas, Brazil

Orlande, Helcio R. B.
Department of Mechanical Engineering and Oncobiology Program, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil

Coulombe, Sylvain
Department of Chemical Engineering, McGill University, Montréal (QC), Canada

Oosthuizen, Patrick H.
Department of Mechanical and Materials Engineering, Queen's University, 130 Stuart Street, Kingston, ON, K7L 3N6, Canada

Zhang, Xing
Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China

Ma, Chong Fang
MOE Key Laboratory of Enhanced Heat Transfer and Energy Conservation, and Beijing Key Laboratory of Heat Transfer and Energy Conversion, College of Environmental and Energy Engineering, Beijing University of Technology, Beijing, 100124, China

Maillet, Denis
University of Lorraine, LEMTA Lab, 2 avenue de la Forêt de Haye - BP 90161 - 54505 Vandoeuvre cedex, France; CNRS, LEMTA, France

Volz, Sebastian
LIMMS/CNRS-IIS(UMI2820), Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 Japan; Laboratoire d'Energétique Moléculaire et Macroscopique, Combustion, UPR CNRS 288, CentraleSupélec, Université Paris-Saclay, Bat. Eiffel, 3, rue Joliot Curie, 91192 Gif-sur-Yvette cedex - France

Kabelac, Stephan
Leibniz University, Institute for Thermodynamics, Callinstrasse 36, 30167 Hanover,Germany

Gross, Ulrich
Institute of Thermal Engineering, TU Bergakademie Freiberg, Gustav-Zeuner-Str. 7, 09599 Freiberg, Germany

Grover, Ravi B.
Reactor Engineering Division, B.A.R.C., Bombay, India

Murthy, S.Srinivasa
Refrigeration and Airconditioning Laboratory, Dept. of Mechanical Engineering, Indian Institute of Technology, Madras, Chennai - 600 036, INDIA

Hetsroni, Gad
Department of Mechanical Engineering, Technion- Israel Institute of Technology, Technion City, 32000 Haifa, Israel

Brauner, Neima
School of Mechanical Engineering The Iby and Aladar Fleischman Faculty of Engineering Tel Aviv University Ramat Aviv 69978 ISRAEL

Celata, Gian Piero
ENEA, Institute of Thermal Fluid Dynamics, ENEA TERM/ISP Heat Transfer Laboratory C.R.E.

Cumo, Maurizio
ENEA, Rome; DINCE, University of Rome “La Sapienza”, Corso Vittorio Emanuele II, 244, Rome, Italy

Kim, Sung Jin
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Daejeon 34141, Republic of Korea

Park, Goon Cherl
Department of Nuclear Engineering, Seoul National University, Shillim-Dong, Gwanak-Gu, Seoul 151-742, Korea

Coelho, Pedro J. M.
Instituto Superior Technico Department of Mechanical Engineering Av. Rovisco Pais, 1049-001 Lisbon Portugal

Costa, Vitor
Universidade de Aveiro

Leontiev, Alexander
Joint Institute for High Temperatures

Dombrovsky, Leonid A.
Joint Institute for High Temperatures, 17A Krasnokazarmennaya Str., Moscow, 111116, Russia; Tyumen State University, 6 Volodarsky Str., Tyumen, 625003, Russia

Du Toit, Charl G. Jat
School of Mechanical and Nuclear Engineering, North-West University, Private Bag X6001, Potchefstroom 2520, South Africa

Meyer, Josua Petrus
Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria, Private Bag X20, Hatfield, 0028, South Africa

Thome, John R.
Laboratory of Heat and Mass Transfer (LTCM), Ecole Polytechnique Fédérale de Lausanne (EPFL), Station 9, CH-1015 Lausanne, Switzerland

Poulikakos, Dimos
Laboratory of Thermodynamics in Emerging Technologies, Institute of Energy Technology Mechanical and Process Engineering Department, ETH Zurich, Switzerland

Van der Meer, Theodorus H.
Department of Applied Physics, Delft University of Technology; Department of Thermal Engineering, Faculty of Engineering Technology, University of Twente, Drienerlolaan 5, 7522NB Enschede, Netherlands

van Steenhoven, Anton A.
Faculty of Mechanical Engineering, Energy Technology Section, Den Dolech 2, 5600MB, Eindhoven, The Netherlands

Briggs, Adrian
School of Engineering and Materials Science, Queen Mary, University of London, London E1 4NS, UK

Hewitt, Geoffrey F.
Department of Chemical Engineering & Chemical Technology Imperial College of Science, Technology & Medicine Prince Consort Road, London SW7 2B Y, England

Jensen, Michael K.
Center for Multiphase Flow, Rensselaer Polytechnic Institute, Troy, NY, USA; University of Wisconsin-Milwaukee, Mechanical Engineering Department Milwaukee, Wisconsin 53201

El-Genk, Mohamed S.
Institute for Space and Nuclear Power Studies; Mechanical Engineering Department; Nuclear Engineering Department, Chemical & Biological Engineering Dept., University of New Mexico, Albuquerque, New Mexico, 87131 USA


Numerical Investigation of Fluid Flow and Heat Transfer in Periodic Porous Lattice-Flame Materials
Swaminathan G. Krishnan, Karthik K. Bodla, Justin A. Weibel, Suresh V. Garimella

Heat Transfer Modeling in Integrated Photoelectrochemical Hydrogen Generators Using Concentrated Irradiation
Saurabh Tembhurne, Mikael Dumortier, Sophia Haussener

Experimental and Computational Film Cooling with Backward Injection for Cylindrical and Fan-Shaped Holes
Shiou-Jiuan Li, Andrew F Chen, Wei-Hsiang Wang, Je-Chin Han

In-tube Condensation of Low GWP Mixture Refrigerants R1234ze(E)/R32
Akio Miyara, Hasan M.M. Afroz, Md. Anowar Hossain

A Study on Post-CHF Heat Transfer at Near-Critical Pressure
Takashi Mawatari, Hideo Mori, Keishi Kariya

Versatile Models for Condensation of Fluids with Widely Varying Properties from the Micro to Macroscale
Srinivas Garimella, Brian M. Fronk, Jeffrey A. Milkie, Brendon L. Keinath