图书馆订购 Guest
主页 旧刊 Thermal Letter 有关人员 未来大会 IHTC汇编
International Heat Transfer Conference 3

ISSN: 2377-424X (online)
ISSN: 2377-4371 (flashdrive)

CONTACT CONDUCTANCE MEASUREMENTS DURING TRANSIENT HEATING

Dale A. Schauer
Lawrence Radiation Laboratory, University of California Livermore, California

Warren H. Giedt
Department of Mechanical Engineering University of California, Davis, California, U.S.A. 95616

DOI: 10.1615/IHTC3.220
pages 100-108

摘要

An experimental method is described for determining the interface conductance between two plates during transient heat transfer. The technique is based on heating one plate in about 100 µsec with a capacitor-bank discharge and then recording the contacting-surface temperatures of the two slabs as they come to equilibrium. Results are presented for combinations of: (1) aluminum and stainless steel with contact-surface finishes of 5-5 µin. AA (arithmetic average), 12-30 AA, 15-38 AA, and 50-35 AA; and (2) stainless steel and ceramic with contact-surface finishes of 31-38 AA, and 64-38 AA. The pressure was varied from 100 to 2000 psi. For metallic contacts the conductance increased about 200% with time. The reverse behavior occurred with the metal-ceramic contacts.

Purchase $25.00 Check subscription 发布道德准则和不当行为 推荐给我的图书馆员 此页放入书签